Others; Warning Display - JVC BR-DV6000E Instruction Manual

Dv video cassette recorder
Hide thumbs Also See for BR-DV6000E:
Table of Contents

Advertisement

OTHERS

When an error occurs, BR-DV6000 automatically self-diagnoses the cause and displays an error-
coded warning message on the monitor.
If BR-DV6000 is not in good order, or if an operation error has occurred, an alarm display will be
shown on the monitor or the LCD.

Warning display

3 2 K C H – 1 / 2
W A R N I N G 7 0 0 1
D R UM MO T O R F A I L U R E
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
T C R 0 2 : 0 0 : 0 0 : 0 0
Alarm display (Displayed regardless of the DISPLAY mode)
Display
The DC power voltage is low.
LOW VOLTAGE
BR-DV6000 will eventually go into the OPER-
ATE OFF mode if operation is continued.
The video head is dirty. (This message is dis-
HEAD
played when the DISPLAY mode is ON or
CLEANING
AUTO.) If the head is clogged, it will be detected
REQUIRED!
and the alarm message will be displayed in the
PLAYBACK mode. The display disappears when
the cassette is ejected or the head gets cleared
of clog.
The message will also disappear when the head
cleaning tape is loaded.
The internal temperature of BR-DV6000 has ex-
OVER
ceeded the stated value.
HEATING!
This is a system error that occurs when the power
UNPLUG MAIN
is turned on. The OPERATE indicator on BR-
POWER, PLUG
DV6000 blinks in green. The unit will not accept
BACK IN
any operation commands.
AFTER A
WHILE
• For alarm displays resulting from operation errors, Refer to page 24.
S
P 0
0 0
m
i n
S T A N D B Y - O F F
Status
– Warning display –
Alarm display
3 2 K C H – 1 / 2
H E A D C L E A N I N G R E Q U I R E D !
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
T C R 0 2 : 0 0 : 0 0 : 0 0
Check the power voltage.
Clean it with a JVC head-clean-
ing tape. (☞ Page 8)
If the message persists despite
cleaning, it could be due to bad
recording condition, defective
tape or head lifespan.
Disconnect the power and place
BR-DV6000 in a cool place. If
this message is displayed
again, the unit may have been
damaged. In such a case, con-
sult your JVC authorized
dealer.
Unplug the power cord from the
power outlet and wait for some
time before plugging it back in.
S
P 0
0 0
m
i n
S T A N D B Y - O F F
Action
E-97

Advertisement

Table of Contents
loading

Table of Contents