Mounting Bracket; Lens Socket - Siemens Simatic VS 710 Quick Reference Manual

SIMATIC VS710

Mounting Bracket

The mounting bracket snaps into place on top of the back panel and is
screwed tight on the front panel, leaving the other three sides of the casing
free for other mounting alternatives.
Mounting bracket
1)
set screw
Figure 5 VS 710 with Mounting Bracket Attached

Lens Socket

The lens socket fits all commercial C-mount standard lenses.
1)
Note: the set screw on the lens socket is meant for factory settings
only. A readjustment of the lens position is not allowed.
8
Quick Reference Guide
M 4 screws
SIMATIC VS 710
A5E00032597-02