Figure 9: Speaker Client Options Screen
Voice Recognition Events
Events can be triggered by voice command via microphone or telephone (or both). For
microphone use, the Speaker Client application must first be installed and configured. By
default, the speaker client is already running on the HomeTroller. If the client is not needed on
the HomeTroller system, edit the file startup.txt in the scripts folder and remove the launch
command. For telephone use, HomeSeer Phone software and the Way2Call Hi-Phone USB voice
interface must first be installed and configured.
To control an event by voice, go to the Event Properties screen for that event (see page 18),
type the voice command to use to run the event, and specify whether the command has to be
spoken through a microphone or a telephone or either. Click the SAVE button to save the
changes to the event.
Command Syntax
Formatting Commands
There are some tricks you can use to format voice commands.
HomeTroller Getting Started Guide – rev 4.1 08/10/2012
Page 21