Download
Share
Print this page
  1. Manuals
  2. Brands
  3. HomeSeer Manuals
  4. Controller
  5. HomeTroller Zee S2
  6. Getting started manual

HomeSeer HomeTroller Zee S2 Getting Started Manual

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
HomeTroller Zee S2 Getting Started Guide
Congratulations on your purchase! Your HomeTroller Zee S2 is ready to put you in control
of your home. Please take a few minutes to read through this guide to familiarize yourself
with the steps required to set up your Z-Wave network and your new HomeTroller Zee S2.
STEP #1
– HomeTroller Zee Initial Setup
Hardware Installation
1. Unpack the HomeTroller Zee, Ethernet cable and AC power supply.
2. Connect the Ethernet cable to your HomeTroller Zee and to a network port on your internet router.
3. Connect the AC power adapter to your HomeTroller Zee to begin the boot process. Allow the unit to boot fully
(about 45 seconds to 1 minute).
Accessing the Web Interface
Once the unit boots, you'll need to access the
web interface to set the system up. The method
below should work with any web-enabled device.
We recommend using Google Chrome
1. Navigate to http://find.homeseer.com
2. Click the "Search" button. Your
HomeSeer system should now appear at the bottom.
3. Click the IP address hyperlink to access your system's web interface.
Set Your System Password
The system password screen will appear the first time you run your HomeTroller
to prevent unauthorized access to your unit.
secure password that will also be easy for you to remember.
Activate and Register Your HomeTroller Zee Online
Be sure to activate your HomeTroller Zee and register the unit to receive HomeSeer support. To do this, make sure your
unit is connected to the internet and follow these steps:
1. From the HomeTroller Zee web interface, use the pull down menus to navigate to the General Tab of the Setup
Area (TOOLS > Setup)
2. Click the "Register Online" button in the License section of the Setup screen and enter your license codes.
Note: License codes are included on a sticker on the bottom of your HomeTroller Zee.
Update Your HomeTroller Zee and Set the Time Zone
1. From the HomeTroller Zee web interface, use the pull down menus to navigate to the General Tab of the Setup
Area (TOOLS > Setup). If an update is available, click the update button near to top of the page and wait for the
update to download and install. Your HomeTroller Zee will automatically reboot once the update is installed.
2. Access the General Tab of the Setup Area again and scroll to the "Location" area. Find the Time Zone field and
change that to time zone where your HomeTroller Zee is installed.
Please do this now by following the prompts on your screen. Choose a
Page 1
Zee. You MUST set a system password
Example: US – America/New York

Advertisement

loading
Need help?

Need help?

Do you have a question about the HomeTroller Zee S2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HomeSeer HomeTroller Zee S2

Summary of Contents for HomeSeer HomeTroller Zee S2

  • Page 1 Activate and Register Your HomeTroller Zee Online Be sure to activate your HomeTroller Zee and register the unit to receive HomeSeer support. To do this, make sure your unit is connected to the internet and follow these steps: 1.
  • Page 2 Your HomeSeer system was designed to work with many different home automation technologies. Each technology requires a specialized hardware interface and software driver (“plug-in”). Your HomeTroller Zee S2 includes a built-in hardware interface for Z-Wave. Other hardware interfaces must be connected externally. Follow the steps below to...

  • Page 3: Z-Wave Network Setup

    1. From the HomeTroller web interface, open the Plug- ins menu and select Manage. 2. Click the yellow circle before Additional Interfaces to open the listing of plug-in categories. 3. Click the corresponding yellow circle before each category to browse the list of available plug-ins. 4.
  • Page 4 process” and a “Close” button will appear above the log window. Your Z-Wave device is now included into your Z-Wave network and can be controlled with your HomeTroller! Removing (or resetting) Z-Wave Devices Follow this procedure if you have difficulty adding a device or if you wish to remove a device from your network. e) From the web interface, use the pull down menus to navigate to the Z-Wave Controller Management page (PLUG-INS >...
  • Page 5 STEP #6 – Creating Automation Events Simply put, an automation event consists of an action (or actions) that are set into motion by one or more triggers. Example: Turning on lights at sunset. Trigger = sunset, Action = turning lights on. With HomeTroller Zee, you can quickly and easily create all the events you need.

  • Page 6: Troubleshooting

    5. Return to HS: This will bring you back to find.homeseer.com to find your HS3 system. HomeTroller Zee System Restore Procedure Use this procedure only after the 911 features do not fix your problem and you have contacted HomeSeer support. This procedure will wipe your existing data.
  • Page 7 Expand Device Management Page / Collapse Device Management Page *If you want to know what that button will do, just hover your cursor over the icon and small text will show to provide definition. HomeSeer | 10 Commerce Park North, Unit #10 | Bedford, NH 03110 www.homeseer.com | 603-471-2816 Rev.