Table of Contents
Advertisement
Important (Read First)!
Important (READ FIRST)!
You may occasionally need to access the HomeTroller Windows interface when installing new
device drivers or related software. To assist with this, HomeTroller units are configured with
RealVNC software (freeware edition) to facilitate desktop access remotely from another
computer. However, since the password for accessing RealVNC is printed in this manual, it is
STRONGLY RECOMMENDED
that you change this password ASAP upon receiving the unit, to
reduce the possibility of a security breach.
Please refer to the section of this manual entitled "Using RealVNC for Remote Access" and
connect to the unit using RealVNC. Once you've connected, right-click on the RealVNC system
tray icon (lower right hand portion of the RealVNC screen) and select "options" to access the
RealVNC server properties screen. Select the "Authentication" tab and click the "Configure"
button to change the RealVNC Password Authentication. Enter your new password and then
save your changes.
Page 2
HomeTroller Getting Started Guide – rev 4.1 08/10/2012
Advertisement
Table of Contents
