Changing and Deleting Mailboxes
Overview
This chapter discusses how to make changes to the values that were programed for
a Mailbox.
Once a mailbox has been created, even if the system timed out and not all the values
were entered, changes to the programing must be made by pressing the CHNG
button.
Changing mailbox options
After a mailbox is certified with Norstar Voice Mail, you can change several
options and overrides. The following series of steps will take you through:
•
resetting a mailbox password
•
changing a mailbox DN
•
changing a mailbox Class of Service
•
changing a mailbox owner's name
•
changing the Company Directory Override
•
changing Message Waiting Notification status
•
changing the Mailbox Outdial route
•
changing the Alternate DNs
•
changing the Fax line
•
changing the Call Screening feature status
Resetting a mailbox password
Resetting a mailbox password changes it to the default password 0000. A password
should be reset only when the mailbox owner forgets it or when the mailbox owner
is "locked-out". After a mailbox password is reset, you must tell the mailbox owner
to change the default password. A mailbox cannot be opened until the default
password is changed.
P0886600 Issue 1.0
8
Set Up and Operation Guide