Adding An Information Message - Norstar Voice Mail 4.0 Set Up And Operation Manual

Rec alt prompt?
YES
You can now continue to build this Tree and add more options, finish building and
save it, or save it and add to it later. For more information about saving a Tree, refer
to "Saving a CCR Tree"
CCR Tree" on page 142.

Adding an Information Message

The Information Message can be used to provide callers with information about
sales, specials, company events, business hours, price lists or even the weather.
To add an Information Message, begin from this display:
Path:
RETRY END
Path:
RETRY END
<x>
MENU
Primary message
Rec pri message:
RETRY PLAY
Accept message?
RETRY PLAY
Rec alt message:
YES
P0886600 Issue 1.0
6. Press NO
If you want to record a prompt in the Alternate
Language, press YES and follow the
instructions that appear on the display.
Do not replace the receiver.
on page 135 and
To arrive at this display, go to
a new tree"
OK
1. Enter the Path number (from 1 to 8) and press
OK .
An example of a Path number in the figure
"Sample CCR Tree Paths" on page 122 is 1-1
(entered as 11), when the Information Message
is on the second level of Path 1.
2. Press INFO .
OTHR
(x represents the Path number.)
3. Pick up the receiver and press REC .
4. At the tone, record your Primary Language
Information Message. Press OK to end your
recording. Do not replace the receiver.
To rerecord your message, press RETRY .
5. Press OK to accept the recording.
6. Press NO .
If you want to record an Alternate Language
Information Message, press YES and follow the
instructions that appear on the display.
Building, Saving, and Enabling a CCR Tree 129
"Accessing the Workspace to change a
"Beginning to build
on page 126, and repeat steps 1 to 6.
Set Up and Operation Guide