Tuner Operations; Manual Tuning - JVC TH-M301 Instructions Manual

Tuner operations

IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
The buttons described below are used on pages 42 to 43.

Manual tuning

1
Press FM/AM repeatedly to select the
band.
Example:
When the system is tuned in to 810 kHz.
2
Press TUNING
you find the frequency you want.
When you hold down the button until the system starts
searching for stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.
NOTE
Remote control
• When a station of sufficient signal strength is tuned in, the TUNED
mode selector
indicator lights on the display window.
• When an FM stereo program is received, the ST indicator lights on the
display window.
Number buttons
8 1 0 k
/ repeatedly until
42