Basic Operations; Turning The System On/Off - JVC TH-M301 Instructions Manual

Basic operations

The buttons on the remote control are used to explain most of the
operations in this manual. You can use the buttons on the center
unit same as on the remote control for operations unless
otherwise noted.
IMPORTANT
Before using the remote control for the following
operation;
• Set the remote control mode selector to AUDIO.
The buttons described below are used on
pages 18 to 21.
Source
selecting
buttons
Cursor
( / / / )/
ENTER

Turning the system on/off

On the remote control:
Press
On the center unit:
Press
When DVD is selected as the source (
messages will appear on the TV screen.
• "OPEN"/"CLOSE":
• "NOW READING":
Remote control
• "REGION CODE ERROR!":
mode selector
• "NO DISC":
• "CANNOT PLAY THIS DISC":
NOTE
• The STANDBY lamp turns on when the power is turned off and turns
off when the power is turned on.
• The power supply to the subwoofer is linked to the center unit. The
POWER ON lamp on the subwoofer lights green when the power is
turned on.
• A small amount of the power is consumed even when the power is
turned off (center unit only). This is called standby mode and the
STANDBY lamp lights in this mode. Unplug the power cord from the
AC outlet to turn the power off completely.
• You can also turn on the system by pressing the following buttons;
•
•
•
AUDIO.
.
Appears when opening or closing the disc tray.
Appears when the system is reading the disc information.
Appears when the Region Code of the DVD VIDEO does not
match the code the system supports. The disc cannot be
played back.
Appears when no disc is loaded.
Appears when unplayable disc is loaded.
One of buttons on the center unit
One of the source selecting buttons on the remote control
One of the DISC (1-5) buttons or
You can use the same buttons on the remote control except after
pressing FM/AM.
pg. 19), the following
on the center unit.
18