Program Playback - JVC TH-M301 Instructions Manual

Advanced operations
4
Press ENTER.
Example:
5
Press Cursor
setting.
6
Press ENTER.
The current VFP settings appear again.
7
Repeat steps 3 to 6 to adjust other
parameters.
8
Press VFP.
NOTE
• Although the setting display disappears in the middle of the
procedure, the setting at that time will be stored.

Program Playback

While stopped
1
Press PLAY MODE repeatedly until
program window appears on the TV
screen.
USE NUMERIC KEYS TO PROGRAM TRACKS.
USE CANCEL TO DELETE THE PROGRAM.
/ to change the
2
Follow the instructions that appears on
the TV screen to program the desired
chapters/ tracks.
• For details on using the number buttons, see "How to use the
number buttons" (
• The content's numbers that you have to specify for
programming varies depending on the disc type:
DVD VIDEO:
•
VCD, SVCD, CD:
•
DVD AUDIO, MP3, WMA:
•
• Before you program the tracks in bonus group on a DVD
AUDIO, perform the procedure of "Playing back a bonus
group" ( pg. 25) to turn off the BONUS indicator on the
display window.
• You can specify the chapters/tracks whose number is up to
99.
To clear the programs one by one from the last
entered number
Press CANCEL repeatedly.
To clear all programs
Press .
You can also clear the program by turning off the system.
3
Press (play button).
If all of the programmed tracks/files have been played back,
playback stops and the program window appears again. Note
that program setting remains.
To check the program contents
During playback, press . Playback stops and the program window
appears.
To quit the Program mode
While stopped, press PLAY MODE repeatedly until both program
window and disappear from the TV screen.
NOTE
• There may be a case where bonus group on a DVD AUDIO cannot be
played.
• The Resume function cannot be used with Program Playback.
• Program Playback may not work for some discs.
See page 26 for button locations.
pg. 25).
Titles and chapters
Tracks
Groups and tracks
34