Connecting A Tv - JVC TH-F3 Instructions Manual

Connecting a TV

After connecting a TV, follow the instructions on
page 10.
■ IMPORTANT
• Connect the main unit directly to a TV (or a mon-
itor) without routing through a video cassette
recorder (VCR). Otherwise picture distortion
may occur during playback. (Routing the con-
nection through a VCR, however, does not affect
the audio quality.)
Main unit VCR
Direct connection
• Connecting the main unit to a VCR-built-in-TV
may also cause picture distortion during play-
back.
Connecting a TV with the [VIDEO]
terminal
TV
To a video input terminal
Composite video cable (supplied)
TV (or monitor)
This system can output uncompressed digital
video signals to a TV compatible with HDMI (High
Definition Multimedia Interface).
Main unit
(rear view)
NOTE
• The HDMI video signal type can be checked with
• If the picture is distorted while an HDMI TV is
• A TV compatible with HDCP (High-Bandwidth
• This system is compatible with some basic func-
Connecting a TV with the
[COMPONENT] terminals
TV
To component
input terminals
Component video cable (not supplied)
Connecting a TV with the [HDMI
MONITOR OUT] terminal
To an HDMI input terminal
HDMI cable (not supplied)
the "HDMI" indicator in the display window.
(Refer to "Selecting the video signal type" on
page 10.)
connected, turn off the main unit and turn it on
again.
Digital Content Protection) can also be con-
nected to the [HDMI MONITOR OUT] terminal,
so that the uncompressed HD video signal type
can be output as well.
tions of HDMI CEC. (Refer to page 50.)
Main unit
(rear view)
Main unit
(rear view)
8