Activating The Surround/Dsp Modes - JVC RX-F31S Instructions Manual

Home cinema control system
Hide thumbs Also See for RX-F31S:
Table of Contents

Advertisement

Activating the Surround/DSP modes

Available Surround/DSP modes vary depending on the incoming
signals. For details, see page 38.
Activating one of the Surround/DSP modes automatically
recalls the memorized settings and adjustments.
• To adjust the speaker output level, see page 29.
• To adjust the effect level for the DSP mode (except All
Channel Stereo mode,) see page 31.
• To add "wraparound" sound effect to "PLII MUSIC"
(PANORAMA control,) see page 31.
• To adjust the sound localization of the center channel
for "NEO:6 MUSIC" (center gain,) see page 31.
• To adjust the vertical localization of the center channel
for Surround/DSP modes (except "PLII MUSIC," "PLIIx
MUSIC," "Neo6: MUSIC," and "ALL CH ST") (center
alignment,) see page 31.
NOTES
• You cannot use any Surround/DSP modes when selecting "DVD
MULTI" as the playback source.
• The on-screen display appears on the TV screen to show the
Surround/DSP mode name for 5 seconds when you select the
Surround/DSP mode.
To cancel the function, set "SUPERIMPOSE" to
"SUPERIMPOSE: OFF" (see page 25).
From the remote control:
1
When operating the receiver
using the remote control, set the
mode selector to
"AUDIO/TV/VCR/DBS."
2
1
Select and play any source other than "DVD
MULTI."
• Make sure you have selected the input mode (analog or
digital) correctly.
2
Press SURROUND repeatedly to select the
Surround/DSP mode you want.
Ex.: When "DOLBY D" is selected for Dolby Digital multi-
channel software:
EQ
C.TONE VIRTUAL SB AUDIO P. BASS TA NEWS INFO RDS TUNED ST
LPCM
L
C
R
PL
DOLBY D
NEO : 6
S . WFR
LFE
DTS AAC
DSP 3D
LS
SB
RS
96 / 24
AUTO SR
AUTO SURR
HALL1
LIVE CLUB
PAVILION
THEATER2
ALL CH ST
(Back to the beginning)
To cancel Surround/DSP modes
Press SURROUND repeatedly so that "SURR OFF" appears on
the display.
AUTO MUTING
SLEEP
AUTO MODE
ATT
HP
MHz
kHz
Surround modes*
HALL2
DANCE CLUB
THEATER1
MONO FILM
SURR OFF
On the front panel:
2
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
1
Select and play any source other than "DVD
MULTI."
• Make sure you have selected the input mode (analog or
digital) correctly.
2
Press SURROUND.
MULTI JOG now works for selecting Surround/DSP modes.
3
Turn MULTI JOG to select the Surround/DSP
mode you want.
Ex.: When "DOLBY D" is selected for Dolby Digital multi-
channel software:
EQ
C.TONE VIRTUAL SB AUDIO P. BASS TA NEWS INFO RDS TUNED ST
PL
LPCM
L
C
R
DOLBY D
NEO : 6
S . WFR
LFE
DTS AAC
DSP 3D
LS
SB
RS
96 / 24
AUTO SR
AUTO SURR
HALL1
LIVE CLUB
PAVILION
THEATER2
ALL CH ST
(Back to the beginning)
To cancel Surround/DSP modes
Turn MULTI JOG so that "SURR OFF" appears on the display.
NOTE
The initial setting is "AUTO SURR."
* Available Surround modes vary depending on the incoming
signals. For details, see "Using the Surround/DSP modes" on
page 38.
When you select "AUTO SURR" (Auto Surround)
You can enjoy the Surround mode easily.
• For details about the Surround modes, see pages 34 to 36.
• When "AUTO SURR" is activated, the AUTO SR indicator lights
up on the display.
How does "AUTO SURR" work?
• If a multi-channel signal comes in, an appropriate Surround
mode will be selected automatically.
• If a Dolby Digital 2-channel or DTS 2-channel signal with
surround signal comes in, "PLII MOVIE" will be selected.
• If a Dolby Digital 2-channel or DTS 2-channel signal without
surround signal, or a Linear PCM signal comes in, "SURR
OFF (stereo)" will be selected.
NOTES
• "AUTO SURR" does not take effect in the following cases:
– While playing an analog source.
– While selecting one of the fixed digital decode modes—
"DOLBY D" or "DTS" (see page 13).
• While listening with the headphones, the 3D HEADPHONE
mode (see pages 36 and 37) is activated without respect to the
type of software played back.
• When "AUTO SURR" is selected, sound may not come out at
the beginning of playback. If it occurs, select a Surround mode
manually.
1, 3
AUTO MUTING
SLEEP
AUTO MODE
ATT
HP
MHz
kHz
Surround modes*
HALL2
DANCE CLUB
THEATER1
MONO FILM
SURR OFF
39

Advertisement

Table of Contents
loading

Table of Contents