Setting The Items; Setting The Speakers - JVC RX-F31S Instructions Manual

4
Press SET.
5
To select the appropriate setting, press
2 or 3 repeatedly, then press SET.
The on-screen display returns to the previous
SETTING MENU. In this example, "SETTING MENU
(4)" appears on the TV screen and "DIGITAL IN1"
appears on the display.
• On the front panel, turn MULTI JOG, then press
SET.
6
Repeat steps 2 to 5 to set other items
if necessary.
NOTES
• To return to "TOP MENU," press MENU on the remote control.
• To exit from menu operations, press MENU on the remote control when "TOP MENU" appears. On the front panel, press SETTING
when a menu except "TOP MENU" appears.
• The setting item previously selected can be shown on the TV screen by pressing SETTING on the front panel when the receiver is in
normal operation mode.

Setting the items

When performing the basic settings viewing the indications on the display, the indications are slightly different from what is shown
on the on-screen display.
This is because of the limited number of characters shown on the display.
Ex.: • "SUBWOOFER: YES" is shown as "SUBWFR: YES" on the display.
• "MIDNIGHT MODE: OFF" is shown as "NIGHT: OFF" on the display.

Setting the speakers

7 Setting subwoofer information—SUBWOOFER
Each time the receiver turns on, the receiver detects the
subwoofer connection and automatically changes the setting of
the subwoofer.
When you want to change the setting manually, select either one
below.
SUBWOOFER: YES
Select when you have connected a subwoofer.
The subwoofer indicator (
S . WFR
can adjust the subwoofer output level (see page 29).
SUBWOOFER: NO
Select when you have disconnected a subwoofer. Selecting
this changes the front speaker size to "LARGE" (see right
column).
NOTE
You need to change the setting each time you turn on the receiver
if you want to change the subwoofer information set automatically.
DIGITAL IN 1
DIGITAL IN 1:2DVR/DVD3
The selected submenu appears.
DIGITAL IN 1
DIGITAL IN 1:2DVR/DVD3
) lights up on the display. You
23:OPERATE
:BACK
DVR/DVD
TV
7 Setting the speaker size—FRONT SPEAKER,
CENTER SPEAKER, SURROUND SPEAKER,
SURROUND BACK SPEAKER
Register the sizes of all the connected speakers.
LARGE Select when the cone speaker size is larger than
12 cm.
SMALL Select when the cone speaker size is smaller than
12 cm.
NO Select when you have disconnected a speaker.
(Not selectable for the front speakers.)
Initial setting: SMALL for all speakers*
* When "SUBWOOFER" is set to "SUBWOOFER: NO," the front
speaker size is fixed to "LARGE" (and you cannot select
"SMALL").
NOTES
• If you have selected "SMALL" for the front speaker size, you
cannot select "LARGE" for other speakers.
• When "SURROUND SPEAKER" is set to "SURROUND SPK:
SMALL," you cannot select "LARGE" for the surround back
speaker.
• When "SURROUND SPEAKER" is set to "SURROUND SPK:
NO," the surround back speaker is fixed to "NO."
• If you change one of the speaker sizes either from "NO" to
"SMALL" or "LARGE," or from "SMALL" or "LARGE" to "NO," the
distance manually set will be applied instead of those set by
using Smart Surround Setup.
O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
x ATT
HP
MHz
kHz
The current setting of the
selected item appears.
O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
x ATT
HP
MHz
kHz
DBS
VCR
21