Turn Wireless On - Blackberry Wireless Handheld Getting Started Manual

2. Connect the narrow end of the USB cable to
the power adapter.
3. Slide the appropriate attachment piece into
the power adapter.
4. Plug the power adapter into a power outlet.
5. Charge the battery to full power
(approximately 3 to 4 hours).
Using the computer
To charge your handheld battery using the
computer, the following system requirements must
be met:
Intel®-compatible 486 or higher computer
•
that is compliant with USB 1.1 or later
Windows®98, Windows ME, Windows 2000,
•
or Windows XP
Available USB port
•
BlackBerry Desktop Software or BlackBerry
•
Handheld Manager must be installed to
obtain the required USB driver on your
computer. See "Setting up for email using
BlackBerry Enterprise Server" on page 5 or
"Setting up for email using BlackBerry Web
Client" on page 6 for more information.
PUSH
Note: If you use Windows 98 (not Windows 98
Second Edition), you must download an update
from
http://www.microsoft.com/com/dcom/
dcom98/dcom1_3.asp
operate as expected.
1. Connect the USB cable to an available port
on your computer.
Note: If you connect your handheld to the
computer using a USB hub, the hub must be
self powered.
2. Insert the handheld into the cradle.
3. Charge the battery to full power
(approximately 3 to 4 hours).

Turn wireless on

Your handheld connects to the wireless network
using an internal radio.
When your SIM card is inserted and the battery is
charged, turn on the radio in an area of wireless
coverage.
See the inside front cover of this guide for
information on wireless coverage levels and the
wireless radio.
Note: If you use BlackBerry Web Client, the
account setup process might begin automatically
the first time that you turn on the wireless radio.
See "Setting up for email using BlackBerry Web
Client" on page 6 for more information.
Setting up your handheld
for the USB driver to
3