Turn Wireless On; Set Up Email - Blackberry 7730 Getting Started Manual

2. Connect the narrow end of the USB cable to
the power adapter.
3. Slide the appropriate attachment piece into
the power adapter.
4. Plug the power adapter into a power outlet.
5. Charge the battery to full power.
Using the computer
To charge your handheld battery using the
computer, the following system requirements
must be met:
Intel®-compatible 486 or higher computer
•
that is compliant with USB 1.1 or later
Windows®98, Windows ME, Windows 2000,
•
or Windows XP
Available USB port. If the port is part of a
•
USB hub, the hub must be self powered.
BlackBerry Desktop Software or BlackBerry
•
Handheld Manager must be installed to
obtain the required USB driver on your
computer. See "Setting up for email using
BlackBerry Enterprise Server" on page 4 or
"Setting up for email using Mobile Email" on
page 6 for more information.
PUSH
Note: If you use Windows 98 (not Windows 98
Second Edition), you must download an update
from http://www.microsoft.com/com/dcom/
dcom98/dcom1_3.asp for the USB driver to
operate as expected.
1. Connect the USB cable to an available port
on your computer.
2. Insert your handheld into the cradle.
3. Charge the battery to full power.

Turn wireless on

Your handheld connects to the wireless network
using an internal radio.
When your SIM card is inserted and the battery is
charged, turn on the radio in a wireless coverage
area. See the inside front cover of this guide for
information on wireless coverage levels and the
wireless radio.
Note: If you use Mobile Email, the account setup
process might begin automatically the first time
that you turn on the wireless radio. See "Setting
up for email using Mobile Email" on page 6 for
more information.

Set up email

To begin sending and receiving email on your
handheld, you must integrate with an account
using one of the setup options listed in the
following two sections of this guide.
Using the computer
3