Disarming A Home/Sleep/Away Or A Home/Sleep/Away With Guest System; Disarming During An Alarm; Extending Schedules - Digital Monitoring Products Canadian XR100 Series User Manual

Disarming a Home/Sleep/Away or a Home/Sleep/
Away with Guest System
1. During the entry delay time, the keypad displays ENTER
CODE:. Enter your 4-digit user code.
2. The keypad then displays any alarms or communication
problems that occurred during the armed period.
3. The keypad next displays ALL SYSTEM OFF to confirm the
system is disarmed.

Disarming During an Alarm

1. While the alarm bell or siren sounds, enter your user code
to silence the alarm. The keypad tone silences as soon as
the first key is pressed.
For a burglary alarm, the keypad displays
CANCEL VERIFY.
This allows you to investigate the alarm prior to disarming
the system. This display remains on the keypad until
a selection is made, the Back Arrow is pressed, or the
internal system bell cutoff timer expires.
2. If a valid alarm has not occurred, select CANCEL to disarm
the system and cancel the alarm.
The keypad next displays ALL SYSTEM OFF to confirm the
system is disarmed.
OR
If the alarm is valid, select VERIFY to send a verify message
to the Central Station.
Arming and Disarming

Extending Schedules

Depending on your system programming, when the open schedule
ends, you can extend the schedule to a later time. The keypad
buzzer sounds and the keypad displays "area name" and LATE or
CLOSING TIME!. This reminds users still on the premises to arm the
system or extend the schedule.
To extend the system schedule:
1. Press any Select key. The keypad displays ENTER CODE: - .
2. Enter your code and press COMMAND or present your access
card to a valid reader.
3. The keypad then displays 2HR 4HR 6HR 8HR. Select the
number of hours to extend the schedule.
Note: If the system is not armed by the scheduled closing
time, a Late to Close report is sent to the central station. If
the schedule is extended, a Schedule Change report may be
sent to the central station.
For information about extending a schedule before the scheduled
closing time is reached, see Extending Schedules (EXT) in the User
Menu portion of this guide.
XR500/XR100 Canadian User's Guide 21