Table of Contents
Advertisement
7.
The keypad displays HOME SYSTEM ON if you selected
HOME, or SLEEP SYSTEM ON if you selected SLEEP, or ALL
SYSTEM ON if you selected AWAY.
8.
The keypad next displays EXIT: ## INSTNT and begins to
count down the number of seconds remaining for you to
exit. The keypad sounds the exit delay alert and when the
delay expires, all zones are armed.
9.
You can select INSTNT while EXIT: ## INSTNT displays to
immediately arm all zones and make them instant. The
keypad displays INSTANT. When you select INSTANT, any
entry/exit zone that trips immediately activates an alarm
and the exit delay countdown immediately stops.
10. When the system is armed, the keypad displays HOME
SYSTEM ON for Perimeter arming, SLEEP SYSTEM ON for
Perimeter and Interior arming, and ALL SYSTEM ON for all
areas armed.
22
HOME/AWAY SYSTEM DISARMING
While the system is armed, you can only enter the premises
through an entry/exit delay door without causing an alarm. After
opening the door, the keypad sounds a prewarn tone to remind
you to disarm the system. You must disarm the system before the
prewarn tone expires or an alarm on the door occurs.
During the prewarn tone, the keypad displays ENTER CODE:.
Enter your code to disarm the system.
Note: Your system will silence the tone as soon as the first user
code digit key is pressed. If a valid user code is not entered within
5 seconds or an invalid user code is entered, the prewarn tone
begins sounding again.
Alarm Display
After disarming, the keypad dis plays any zones that tripped or any
communication problems that occurred dur ing the armed period.
All burglary zones are then dis armed and any by passed zones
automatically reset.
Disarmed Message
The keypad displays ALL SYSTEM OFF after the system disarms.
Emergency Monitoring Station Report
Your system may be pre-programmed at installation to send a
report of the system disarming to the Emergency Monitoring
Station.
XT Series International User Guide
Arming and Disarming
Advertisement
Table of Contents
