Arming And Disarming An All/Perimeter System; Arming And Disarming A Home/Sleep/Away System And A Home/Sleep/Away With Guest System; Disarming With Entry Delay - Digital Monitoring Products Canadian XR100 Series User Manual

PERIM ALL

Arming and Disarming an All/Perimeter System

or
Press COMMAND. The keypad displays PERIM ALL (when arming) or DISARM?. Press the Select key
DISARM?
under the desired option. The keypad displays ENTER CODE: -.
Present your card to the reader. Once the system validates the card, if you choose PERIM, only
the perimeter arms. If you choose ALL, both areas arm. If programmed on a 32-character keypad,
ALL may be automatically chosen for you after a short delay. Present your card to the reader and
all armed areas disarm automatically.
Arming and Disarming a Home/Sleep/Away System and a
ABC SECURITY
Home/Sleep/Away with Guest System
ARM DISARM
Present your card to the reader. If the system is armed, once the system validates
the card, all areas are disarmed and the keypad displays ALL SYSTEM OFF.
If the system is disarmed when you present your card, once the system validates the
card, HOME SLEEP AWAY displays. You can manually press the Select key under the
desired option or after short time all areas may be automatically armed in the AWAY
mode.

Disarming with Entry Delay

ABC SECURITY
All Systems - Once the protected door is opened and the entry
ENTER CODE: –
delay starts, the keypad displays ENTER CODE: - . Present your
card to the reader. Once validated, the system disarms all areas
accessible by you. Area systems provide a delay to allow selected
areas only to be disarmed. See Arming and Disarming above and
on the previous page.
Using the Access Reader for User Menu Access
You can also use a card reader to access the User Menu. When
MENU? NO YES displays, select YES and enter a code when
requested.
64 XR500/XR100 Canadian User's Guide