Advanced Settings - EnGenius ECB-1221R User Manual

ECB-1221R Wireless Long Range Multi-function Client Bridge
Band: Select the IEEE 802.11 mode from the dr op-down list. Options available are
2.4GHz (B), 2.4GHz (G), or 2.4GHz (B+G). Select the appropriate mode based on
the type of wireless network. For example, if you are sure that the wireless network
will be using only IEEE 802.11g clients, then it is recommended to select 2.4GHz (G)
instead of 2.4GHz (B+G) which will reduce the performance of the wireless network.
SSID: The S SID is a un ique nam ed s hared amongst a ll t he points of the wirel ess
network. The SSID must be identical on all points of the wireless network and cannot
exceed 32 characters.
Channel: Sel ect a c hannel from the dr op-down list. T he c hannels av ailable are
based on the country's regulation. When selecting Infrastructure mode, a channel is
not r equired, h owever, whe n s electing A dhoc mo de, you mu st select the same
channel on all points.
Show Active Clients: Click on this button to view a list of associated clients.
Click on t he Apply Changes b utton t o c onfirm t he changes. This d evice will
automatically restart once these changes have been applied.
Enable Universal Repeater Mode: Select Enable to activ ate U niversal R epeater
Mode and type below SSID for extended wireless interface.

Advanced Settings

Click on t he Advanced Settings link unde r t he Wireless me nu. On th is p age yo u
can configure t he advanced s ettings t o tw eak th e performance of y our wireless
network. Options availa ble a re: frag mentation th reshold, RTS thr eshold, b eacon
interval, output power, preamble type, broadcast SSID, IAPP, and 802.11g protection.
62