Access Point/Router Mode - Config; Logging In - EnGenius ECB-1221R User Manual

Wireless long range multi-function client bridge

Hide thumbs Also See for ECB-1221R:

Table of Contents

ECB-1221R Wireless Long Range Multi-function Client Bridge

Since this d evice is currently in Access Point mode, the AP radio butt on will be

selected by default.

5 Se

lect the Bridge or Bridge Router radio button to and then click on the Apply

Change to switch the operation mode to Bridge.

Wait for about 1 minu te and t he dev ice will auto matically restart into Bridge

mode.

4 Access Point/Router Mode – Config

To configure the AP through the web-browser, type IP address (default: 192.168.1.2)

into the address bar of the web-browser and press Enter.

Make sure that the ECB-1221R and your computers are on the same subnet. Refer

to Chapter 2 in order to configure the IP address of your computer.

Username：admin; Password：admin

Table of Contents