Status - EnGenius ECB-1221R User Manual

ECB-1221R Wireless Long Range Multi-function Client Bridge
Refer to Chapter 4 t o learn h ow t o configure this devic e in B ridge/Bridge Ro uter
mode.

Status

Click on the Status link under the Management menu. The Status page is the first
page that is displayed o nce y ou have lo gged i n. This in cludes d etails about the
system, wireless, and TCP/IP configuration.
System
Uptime: Duration of time since the device was last reset.
o
Firmware version: V ersion of the firmwar e t hat i s currently loaded o n th e
o
device.
Wireless Configuration:
Mode: Wireless configuration mode such as client bridge, AP, or WDS.
o
Band: Frequency and IEEE 802.11 operation mode (b-only, g-only, or b+g).
o
SSID: The name used to identify the wireless network.
o
Channel Number: The channe l us ed t o communicate o n the wirel ess
o
network.
Encryption: The ty pe o f secur ity used on this net work. It may b e disabled,
o
WEP, WPA, etc.
BSSID: The MAC address of the SSID.
o
Associated Clients: D isplays the numb er of c lients currently ass ociated to
o
the Access Point.
TCP/IP Configuration:
Attain IP Protocol: The IP address setting may be fixed or static.
o
IP Address: Displays the current IP address of the LAN port.
o
Subnet Mask: Displays the current subnet mask for the IP address.
o
Default Gateway: Displays the default gateway for the device.
o
DHCP: Displays the DHCP setting.
o
MAC Address: Displays the MAC address of the device.
o
50