Pittasoft BlackVue DR350 User Manual page 10

Using the BlackVue
Installing the BlackVue in a vehicle
1.
Stop the engine and remove the key
from the ignition.
N InstallXtheXBlackVueXinXaXwell-litXandXsafeX X
location.X
2.
Insert a Micro SD card into the BlackVue.
N ForXmoreXinformationXonXusingXtheX X
MicroXSDXcard,XreferXtoXpageX7.
3.
Attach the BlackVue to a windshield of
your car using double-sided tape.
N WeXrecommendXthatXyouXinstallXtheX X
BlackVueXbehindXtheXrearXviewXmirror.XX
TheXlensXofXBlackVueXshouldXbeXlocatedX
onXtheXcenterXofXtheXvehicle.
N InstallXitXinXaXlocationXthatXdoesXnotX X
hinderXyourXvisibility.X
N WipeXallXforeignXmaterialXandXmoistureX X
fromXtheXsurfaceXtoXwhichXtheXdouble-
sidedXtapeXwillXbeXattachedXusingXaXsoftX
andXdryXcloth.
N IfXtheXproductXisXinstalledXonXaXwindowX X
hotXwire,XthisXmayXcauseXtheXhotXwireX
toXbeXdamagedXwhenXremovingXtheX
productXlater.
N IfXtheXBlackVueXhappensXtoXbeXremovedX X
fromXtheXholder,XreferXtoXpageX10.
4.
Connect the [DC IN] terminal of the
BlackVue and the cigarette jack of
your car using the power cable.
N ForXparkingXmode,XconnectingXtheX X
POWERXMAGICX(aXbatteryXpowerX
controller)XisXrecommended.
N UseXaXmultiXpowerXleads,XinXcaseX X
8
BlackVueXisXusedXwithXotherXcarXdevice.
Installing the BlackVue
d
d
d
d