Connecting To An Analog Component; Connecting To A Digital Component - JVC LVT0865-004A Instructions Manual

Connecting to an analog component

You can enjoy the sound of an analog component such as a VCR, TV, or Cassette recorder through this system. Connect an
analog component using the cord with RCA pin plugs (not supplied).
• Connect the white plug to "AUX IN L" (the left audio jack), the red to "AUX IN R" (the right audio jack).
AUX IN
R L
RCA pin plug cord
To audio
output
VCR
NOTES:
• If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound output
through this system may be distorted.
• When playing a video component such as a VCR:
– To listen to the sound, operate this system. (Select "AUX" as the source to play. See page 22.)
– To see the picture, connect the video output jack of the component to the video input jack of the TV, and select the correct input mode on
the TV.

Connecting to a digital component

You can enjoy the sound of a digital component such as a DBS tuner or MD recorder through this system. Connect a digital
component using the digital optical cord (not supplied).
DBS tuner
MD recorder
NOTES:
When playing a video component such as a DBS tuner:
• To listen to the sound, operate this system. (Select "AUX DIGITAL" as the source to play. See page 22.)
• To see the picture, connect the video output jack of the component to the video input jack of the TV directly, and select the correct input mode
on the TV.
AUX IN
DIGITAL IN
TO SP-PWV70
AV
COMPU
LINK
OPTICAL
R L
AM LOOP
FM 75
AV
ANTENNA
COAXIAL
AM
EXT
H V
RGB Y / C
DISP.SET
To audio output
TV
Digital optical cord
AUX IN
TO SP-PWV70
R L
AM LOOP
FM 75
COAXIAL
AM EXT
H V
RGB
Center unit
DISP.SET
VIDEO OUT
VIDEO
AV OUT
S-VIDEO
Cassette recorder
DIGITAL IN
OPTICAL
DIGITAL IN
AV
COMPU
LINK
OPTICAL
AV AV OUT
ANTENNA
Y / C
AC IN
Center unit
To audio output
Before connecting a
digital optical cord,
unplug the protective
plug.
VIDEO OUT
VIDEO
S-VIDEO
AC IN
14