Trainer Mode; Analog Switch Setup; System Settings - Spektrum DX10t Instruction Manual

6-17 Trainer Mode

You will see on the Display the function allocation of
Master and Slave Channels referring to the model
function. You can change functions.
6-18 Stick Switch Settings
Deleting functions with left or right Stick Switch Button or
left or right Front Stick Button
Functions back with left or right Stick Switch Button or left
or right Front Stick Button
You can select: Function disabled
Auto trim functions with left or right Stick Switch Button or
left or right Front Stick Button or Function disabled
You can assign these settings only one time.

6-19 Analog Switch Setup

The analog switch setup function is for allocate switches
and their position in the upper panels.

6-20 System Settings

Basic settings are programmed in the System
Settings menu:
• User Name
• Display contrast ranges from 1 to 20. The Standard
contrast is 10.
• Duration of Backlight: You can choose from off to on to
intermittent settings: 3 seconds (s), 10s, 20s, 30s, 45s,
und 60s.
• Mode: 4 Modes are available
• Battery: LiPo
• Battery Alarm: 6.4 to 8.3 Volt
• Languages: German and English
• Region EU and France
• Automatic Inactive Alarm: disabled 5, 19, 30, and 60
minutes
With NEXT, you can select:
• System Sound: Active/Inhibit
• Vibrator: Active/Inhibit
• Trim Display: Inhibit, Boxed Boxes, Boxes Arrows
With NEXT, you can see:
• Serial Number
• Software Version
With NEXT, you can:
Calibrate the Sticks left, right and center as well as
calibrate the roller left and right.
SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
11