Table of Contents
Advertisement
EN
Trainer
All options related to programming and using the trainer functions are
controlled with the Trainer menu.
Three options are available in the trainer menu:
• Wired Trainer
• Wireless Trainer
• Trainer Alerts
Wired Trainer and Wireless Trainer have similar options when
connecting two transmitters for the purpose of training a student
pilot. In addition, an advanced menu for FPV pilots in both the
Wired and Wireless Trainer menus provides specialized functions
needed specifically for FPV head tracking applications.
Wired Trainer
Wired Trainer enables a student and instructor to work together by
physically connecting two transmitters together with a cable.
The optional Spektrum wired trainer adaptor (SPMA3091, not
included) and trainer cable (SPM6805, not included) are required
for wired trainer operation. The wired trainer adaptor connects
to the serial port on the back of the transmitter. The trainer cable
plugs into the adaptor.
Wired trainer supports up to 8 input channels with PPM based
trainer systems connected. If the NX10 is used with a wired
connection, the correct wired trainer option must be selected in
the trainer menu and the student mode started or the wired trainer
connection will not work.
When Wired Trainer mode is selected, a menu will appear. Select
from the following trainer options:
Standard Instructor
This training mode designates the NX10 as the instructor, and
requires the student transmitter to be fully configured, including
reversing, travel, mixes, etc. This mode is helpful when the student
has the full model configuration complete.
Wireless Trainer
Wireless Trainer enables instructors and students to work
together without any cables connecting the transmitters. Wireless
Trainer supports up to 10 channels of input depending on the
number of channels available from the student transmitter or
wireless headtracker. It is only necessary to put the instructor
transmitter into the special wireless trainer bind mode. The
student transmitter uses the normal binding process. Wireless
Trainer modes are compatible with any Spektrum DSMX or DSM2
transmitter, Spektrum Focal
Headsets, and the small MLP4 and
®
MLP6 transmitters from Horizon Hobby RTF models which include
Spektrum technology.
20
Pilot Link Instructor
This training mode designates the NX10 as the instructor, and
requires the student transmitter to have no settings applied, all of
the reverse settings to normal and all travel settings at 100%. This
option is intended to make it as simple as possible to connect any
student transmitter to any airplane.
FPV
This mode is available for connecting a head tracking system to
the NX10 for FPV use. See the Headtracking FPV Setup section for
more information.
P-Link Student
This training mode designates the NX10 as the student transmitter.
Use this option if the instructor transmitter is set up with Wired Pilot
Link Instructor. A Start Student Mode button appears, which activates
and deactivates wired trainer student capabilities. In this mode, the
NX10 should be left on a default ACRO model with no changes.
Normal Student
This training mode designates the NX10 as the student transmitter.
Use this option if the instructor transmitter is set up with Wired
Programmable Instructor. A Start Student Mode button appears, which
activates and deactivates wired trainer student capabilities. In this
selection the NX10 must be fully configured to operate the aircraft.
When wireless trainer mode is selected, a drop down menu will
appear with the following options:
Programmable Instructor
This training mode designates the NX10 as the instructor and
requires the student transmitter to be fully configured, including
reversing, travel, mixes, etc. This mode is helpful when the student
has the full model configuration complete.
Pilot Link Instructor
This training mode designates the NX10 as the instructor and
requires the student transmitter to have no settings applied, all of
the reverse settings to normal and all travel settings at 100%. This
option is intended to make it as simple as possible to connect any
student transmitter to any airplane.
FPV
This mode is available for connecting a head tracking system
to the NX10 for FPV use. This option is covered further in the
Headtracking FPV Setup section.
SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL
Advertisement
Table of Contents
