Using The Dvd Multi Playback Mode; Activating The Dvd Multi Playback Mode; Adjusting The Speaker Output Level - JVC LVT1002-001B Instructions Manual

RX-ES1SL

Using the DVD MULTI playback mode

This receiver provides the DVD MULTI playback mode for
reproducing the analogue discrete output mode (5.1 channel
reproduction) of the DVD player.
In addition, the DVD MULTI playback mode can be used for
reproducing a DVD Audio sound.
Before playing back a DVD, refer also to the manual supplied with the
DVD player.
• When using the DVD MULTI playback mode, connect the DVD
player with its analogue discrete output jacks to the DVD IN jacks
on the rear panel (see page 10).
• DVD MULTI playback mode cannot be used for XV-N55SL.
When operating this receiver using the remote
control, always set the mode selector to
AUDIO/TV/VCR/STB.

Activating the DVD MULTI playback mode

On the front panel:
TV DIRECT SETTING ADJUST SURROUND
DVD MULTI DVD
STANDBY / ON STANDBY
1
Turn SOURCE SELECTOR until "DVD MULTI"
appears on the display.
The DVD MULTI indicator lights in red.
2
Select the analogue discrete output mode on the
DVD player, and start playing a DVD.
From the remote control:
1
Press DVD MULTI.
The DVD MULTI indicator lights in red.
2
Select the analogue discrete
output mode on the DVD player,
and start playing a DVD.

Adjusting the speaker output level

You can adjust the speaker output level while playing a DVD using the
analogue discrete output mode on the DVD player.
Once you have adjusted the sound, the adjustment is memorized.
• The test tone does not output through the speakers to adjust the
speakers output levels when selecting DVD MULTI.
From the remote control:
It will be convenient for you to use the remote control for the sound
adjustments, since you can make adjustments from your listening point.
Adjust the following speaker output
levels (from –10 dB to +10 dB).
• Make adjustments so that the sound level of the
selected speaker is set at the same level as that
of the front speakers.
To adjust the center speaker level,
press CENTER +/–.
To adjust the left surround speaker level,
press SURR L +/–.
To adjust the right surround speaker level,
press SURR R +/–.
34
AUDIO/TV
/VCR/STB
SOURCE SELECTOR MASTER VOLUME
/ MULTI JOG
SET / TUNER PRESET
STB VCB TV FM / AM
TV DIRECT
DVD VCR STB
DVD VCR STB
DVD MULTI FM/AM TV/VIDEO
TV VOL CHANNEL VOLUME
TUNING FM MODE TUNING
AUDIO SUBTITLE TITLE/GROUP
ZOOM BASS
1 2
BASS
4 5
VFP
7 8
ANGLE TV RETURN
10 0
REPEAT
3D
DIMMER SLEEP ANALOG/DIGITAL
INPUT
SMART S. SETUP BASS BOOST A.POSITION
TONE
SURROUND
TEST EFFECT DECODE
SUBWFR CENTER L SURR
On the front panel:
TV DIRECT SETTING ADJUST
STANDBY / ON STANDBY
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press ADJUST.
DVD
MULTI JOG now works for the sound adjustment.
2
Turn MULTI JOG until the setting item you want
to set appears on the display, then press SET.
• As you turn MULTI JOG, the indication changes as follow:
ANALOG L C R
SUBWFR LFE
LS RS
PHONES
BASS
CENTER
EFFECT
B.BOOST
CENTER*:
SURR L*:
SURR R*:
AUDIO
* "0 (dB)" is the initial setting.
TV
3
Turn MULTI JOG to adjust the item selected in
TV
step 2 , then press SET.
MUTING
Your setting is stored.
DVD
AUDIO/TV
/VCR/STB • Make adjustments so that the sound level of the selected
speaker is set at the same level as that of the front speakers.
ANALOG L C R
SUBWFR LFE
LS RS
Ex.: When selecting "+8 (dB)" for "CENTER."
4
Repeat steps 2 and 3 to adjust the other
settings.
RETURN
NOTES
TREBLE
3
TREBLE
• When you select DVD MULTI as a source to play, the selected
6
9
Surround/DSP mode is canceled, and the SURROUND button does
100 +
+10
not work.
CANCEL
• When using a pair of headphones, the sounds of front left and right
channels are output from the headphones.
• The DVD MULTI button does not work for TV Direct.
R
SURROUND SET / TUNER PRESET
DVD MULTI DVD STB VCB TV FM / AM
SUBWFR
TREBLE
SURR L SURR R
PANORAMA BAL
(Back to the beginning)
ATT
To adjust the center speaker output level
(from –10 dB to +10 dB).
To adjust the left surround speaker output level
(from –10 dB to +10 dB).
To adjust the right surround speaker output level
(from –10 dB to +10 dB).
SOURCE SELECTOR MASTER VOLUME
/ MULTI JOG
PHONES
VOL
VOL