JVC LVT1002-001B Instructions Manual page 36

3
Press TEST to check the speakers output
balance.
"TEST L" starts flashing on the display, and a test tone comes out
of the speakers as follow:
PL ΙΙ
L R
LPCM
SUBWFR
TEST L
(Left front speaker) (Center speaker)
TEST LS
(Left surround speaker)
4
Adjust the following speaker output levels
(from –10 dB to +10 dB).
• Make adjustments so that the sound level of the selected
speaker is set at the same level as that of the front speakers.
To adjust the center speaker level,
press CENTER +/–.
To adjust the left surround speaker level,
press SURR L +/–.
To adjust the right surround speaker level,
press SURR R +/–.
PL ΙΙ
L R
LPCM
SUBWFR
Ex.: When selecting "+8 (dB)" for "CENTER."
5
Press TEST again to stop the test tone.
The currently selected source name appears on the display.
VOL
TEST C
TEST R
(Right front speaker)
TEST RS
(Right surround speaker)
VOL
Creating realistic sound fields
On the front panel:
• No test tone is available when using the buttons on the front panel.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
TV DIRECT SETTING ADJUST SURROUND
DVD MULTI DVD
STANDBY / ON STANDBY
1
Select and play software you like.
2
Press SURROUND.
MULTI JOG now works for the Surround/DSP mode selection.
3
Turn MULTI JOG to select a appropriate surround
mode.
• As you turn MULTI JOG, the indication changes as follow:
When playing back multi-channel digital software such as
Dolby Digital or DTS Digital Surround:
L C R
SUBWFR LFE
DOLBY D
LS RS
DOLBY D or DTS
When playing back 2 channel digital software such as
Dolby Digital or DTS Digital Surround:
PL II MOVIE
STEREO
When playing back any software other than above:
PL II MOVIE
PL II MUSIC
LIVE CLUB DANCE CLUB
HALL PAVILION
ALL CH ST.
STEREO
(Back to the beginning)
If "AUTO SR (Auto Surround)" is set to "ON"
Playing a digital source automatically activates an appropriate
Surround mode. (See page 20.) → Go to step 3 .
4
Press ADJUST.
MULTI JOG now works for the sound adjustment.
5
Turn MULTI JOG until the setting item you want
to set appears on the display, then press SET.
• As you turn MULTI JOG, the indication changes as follow:
PL ΙΙ
L R
LPCM
SUBWFR
BASS TREBLE
SURR L
CENTER
PANORAMA*
EFFECT
B.BOOST ATT
* Available only for "PL II MUSIC."
CONTINUED ON THE NEXT PAGE
SOURCE SELECTOR MASTER VOLUME
/ MULTI JOG
SET / TUNER PRESET
STB VCB TV FM / AM
VOL
STEREO
(Surround/DSP off)
PL II MUSIC
(Surround/DSP off)
(Surround/DSP off)
VOL
SUBWFR
SURR R
BAL
(Back to the beginning)
PHONES
31