Changing The Scanning Mode - JVC FS-S77B/FS-S77S Instructions Manual

To assemble and connect the AM loop antenna
To assemble the AM loop antenna
To connect the AM loop antenna
1 Hold
2 Insert
• If the AM loop antenna wire or speaker cords are covered
with vinyl, remove the vinyl to expose the tip of the
antenna by twisting the vinyl.
• Make sure the antenna conductors do not touch any other
terminals, connecting cords and power cord. Also, keep the
antennas away from metallic parts of the System,
connecting cords, and the AC power cord. This could cause
poor reception.
To connect the speaker cords
Connect the right speaker to the RIGHT terminals, and the
left speaker to the LEFT terminals.
1 Open 2 Insert
When connecting the speaker cords, match the polarity of
the speaker terminals:
• For LOW terminals: Red cord to (+) and black cord to (–).
• For HIGH terminals: Grey cord to (+) and blue cord to (–).
• DO NOT connect more than one speaker to
each terminal.
• DO NOT allow the conductor of the speaker
cords to be in touch with the metallic parts of
the System.
6
To connect the AV COMPU LINK cords
This system allows you to use JVC's TV with simple
operations; by starting playing back a disc, the TV
automatically turns on and changes the input mode to the
appropriate position so that you can view the playback
picture.
To use AV COMPU LINK, you need to connect the System
and the TV by using a cord with monaural mini-plugs (not
supplied) in addition to the video input/output connection
through the COMPONENT jacks, S-VIDEO jack or VIDEO
(composite) jack on the rear.
To connect digital audio
3 Release
Before connecting optical digital cord, remove the
protective cap from the DVD OPTICAL DIGITAL
OUT terminal.

Changing the Scanning Mode

This System supports progressive scanning.
If you connect a progressive TV through the COMPONENT
jacks, you can enjoy a high quality picture from the built-in
3 Close
DVD player by selecting "PROGRE."
(at the same time)
PROGRE
INTER
D V D
O P T
D I G
I C A
I T A L
L
O U T
P C M
/ S T R
E A M
PROGRESSIVE
PROGRE
0
INTER
Progressive scanning. For a progressive
TV.
Interlaced scanning. For a conventional
TV.
Remote
ONLY