Attaching And Detaching The Port - Sea&Sea MDX-5D Mark III Instruction Manual

Attaching and Detaching the Port

In order to use this product underwater, the optional port for the camera
lens must be attached to this product.
CAUTION
Only the optional ports designed for SEA&SEA digital SLR camera housings
can be attached to this product.
Ports have different depth rating. Check the depth rating for each before
use.
This product is delivered with a housing body cap attached to the port mount.
Make sure to remove the housing body cap when attaching the port.
The housing body cap has no watertight capability.
When attaching the port to the housing, always refer to the instruction
manual provided.
1
Rotate the port lock lever on the
bottom of the front case toward
until you hear the sound of it
clicking into the place
2
Align the positioning mark on the
front case with the OPEN mark
on the port, insert the port into
the front case, and then rotate
the port in a clockwise direction
until it stops
CAUTION
Before attaching the port, make sure
there are no specks of dust, scratches,
or deformities on the O-ring and the
O-ring contact surfaces.
3
Make sure that the positioning
mark on the front case and the
LOCK mark on the port are aligned
4
Rotate the port lock lever toward
until you hear the sound of it
clicking into place
E-11
Positioning mark