Toshiba RAS-M22SKV-E Service Manual page 69

No. Part name
Electric parts 1) Follow the procedure up to 3) in
2
box assembly
2) Remove screw of earth lead attached to
3) Remove the lead wire cover, and remove
4) Pull out TC sensor from sensor holder of
5) Disengage the display unit by simply
6) Remove the fixing screw that secures the
<How to assemble the electric parts box>
1) Hook the top part of the electric parts
2) Secure the grounding wire using the
Horizontal 1) Remove shaft of the horizontal louver
3
louver
Procedures
the end plate of the evaporator.
connector for the fan motor and
connector for the louver motor from the
electric parts box assembly.
the evaporator.
pushing at the top of the display unit.
electric parts box assembly, LED
assembly and remove the assembly.
box assembly onto the claws on the back
body, and secure it using the fixing screw.
Now attach the display unit.
Connect the connectors for the fan motor
and louver motor.
fixing screw.
Insert the TC sensor into the sensor
holder.
∗ Be absolutely sure to loop the
grounding wire and TC sensor leads
once at the bottom.
from the back body. (First remove the left
shaft, and then remove other shafts while
sliding the horizontal louver leftward.)
above.
2
Earth screw
LED assembly
– 69 –
Remarks
Electric part box cover
TC sensor
Fan motor
connector
Louver motor
connector
Fixing screws
TCJ senser