Toshiba RAS-M22SKV-E Service Manual page 37

4. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. Push MODE : Select Dry
2. Push MODE : Set the desired temperature.
TEMP
5. Hi POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating operation
(except in DRY mode)
Push Hi-POWER : Start and stop the operation.
6. ECO OPERATION
To automatically control room to save energy (except in DRY mode)
Push ECO : Start and stop the operation.
Note:
Cooling operation; the set temperature will increase automatically 1 degree/hour for 2 hours
(maximum 2 degrees increase). For heating operation the set temperature will decrease.
7. TEMPORARY OPERATION
In case of the misplaced or discharged remote controller
• Pushing the RESET button, the unit can start or stop
without using the remote controller.
• Operation mode is set on AUTOMATIC operation, preset
temperature is 24°C and fan operation is automatic speed.
8. TIMER OPERATION
1 Push : Set the desired ON timer.
ON
2 Push : Set the timer.
SET
3 Push : Cancel the timer.
CLR
Everyday timer allows the user to set both the ON and OFF timers and will be activated on a daily basis.
Setting Everyday Timer
1 Push : Set the ON timer.
ON
2 Push : Set the OFF timer.
OFF
• During the every day timer is activation, both arrows (
.
Setting the ON Timer Setting the OFF Timer
Push : Set the desired OFF timer.
OFF
Push : Set the timer.
SET
Push .
CLR
3 Push .
SET
Push button during the
SET
4
( or ) mark flashing.
or ) are indicated.
– 37 –