Eco; Dynamic Range - Yamaha RX-V575 Owner's Manual

■
Volume
Configures the volume settings.

❑ Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
Maximum (default) Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Sets the dynamic range for clear sound even at night or at low
volumes.
Min/Auto
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
❑ Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
❑ Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
Sets the level to the volume level of the unit when it last entered
Off (default)
standby mode.
Mute Sets the unit to mute the audio output.
-80.0 dB to +16.5 dB
Sets the level to the specified volume level.
(0.5 dB increments)
❑ ZoneB Volume
(RX-V575 only)
Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A.
Settings
Adjusts the volume for Zone B in conjunction with the volume for
Sync. (default)
Zone A.
Does not adjust the volume for Zone B in conjunction with the volume
Async.
for Zone A. Adjust the volume for Zone B separately (p.62).
• If "ZoneB Volume" is set to "Async.", the volume for Zone B is temporarily set to -40 dB. As necessary,
adjust the volume using the remote control (p.62).

ECO

Configures the power supply settings.
S e t u p
S p e a k e r A u t o P o w e r S t a n d b y
H D M I E C O M o d e
S o u n d
E C O
F u n c t i o n
N e t w o r k
L a n g u a g e
■
Auto Power Standby
Sets the amount of time for the auto-standby function. If you do not operate the unit for
the specified time, the unit will automatically go into standby mode.
Settings
Off Does not set the unit to standby mode automatically.
Sets the unit to standby mode when you have not operated the unit for
2 hours, 4 hours,
the specified time. For example, when "2 hours" is selected, the unit
8 hours, 12 hours
will switch to standby mode if you do not operate it for 2 hours.
Default
U.K. and Europe models: 8 hours
Other models: Off
• Just before the unit enters standby mode, "AutoPowerStdby" appears and then countdown starts in the
front display.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
77
En