Miele PW 6055 Operating And Installation Instructions page 25

This machine has fully electronic
controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
The programme sequences outlined in
the chart are based on the basic
programme with a full load. Extra
options which can be selected have not
been taken into account.
The programme sequence display
shows the stage the programme has
reached.
Programme sequence
Special features in the programme
sequences:
Anti-crease:
At the end of every programme, with
the exception of the Woollens
programme, the drum continues to turn
at intervals for up to 30 minutes to help
prevent creasing. The door can be
opened and laundry removed at any
time during the anti-crease phase.
1)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate air from the pillows.
Subsequent water intake for the main
wash is through compartment j.
2)
Pre-rinse: A Pre-rinse without
detergent is carried out automatically
to remove dust.
3)
In the Outerwear programme,
laundry is only spun after the main
wash.
4)
Pre-rinse: 2 rinses are carried out at
the beginning of the programme to
remove any coarse soiling.
25