Destiny apex 6100 Owner's Manual page 5

If no zones are open, the red HOME LED will light and you will hear the system say "ARMED TO
HOME" over the phone or through the speaker.
The security system is now on, or armed. When armed to the HOME mode, only the exterior, or
perimeter, zones are armed. This will allow you to move about freely within your home. If any zone
is open while attempting to arm the system, the HOME LED will not light and you will hear the
system say "ZONES OPEN" over the phone or through the speaker, which indicates that the system
did NOT arm. (See FORCE ARMING to continue)
3. Arming the system to NIGHT: (optional)
Push the H key twice on a system keypad,
Or
Press the # key twice during local or remote phone access,
The green AWAY LED will light with the red HOME LED and the system will say "ARMED TO
NIGHT" over the phone or through the speaker. When armed to the NIGHT mode, the perimeter entry
delay zones become instant (no entry or exit delay) and your installer may program some interior zones
to be active. If you wish to return to the HOME mode, simply push the # or H key any time the system
is in the NIGHT mode.
4. Force arming the system:
If you attempt to arm the system to either HOME or AWAY but you hear "ZONES OPEN" over the
phone or through the speaker and notice that neither the HOME LED nor the AWAY LED has come
on, the system is NOT armed. However, the system can be FORCED ARMED.
Push the appropriate button for the type of arming you want again, # or H for HOME, * or A for
AWAY, within ten seconds. If arming to HOME, the RED LED will now light and "FORCE ARMED
TO HOME" will be heard indicating that the system is now ARMED to HOME. If arming to AWAY,
the green AWAY LED will now light and "FORCE ARMED TO AWAY" will be heard. When
FORCE ARMED either to HOM E or AWAY, the yellow STATUS LED will be lit. You can find out
which zones are open by requesting system status.
NOTE: When you FORCE ARM your system, security is compromised because the open zone will be
ignored by the system. Check with your installer to determine how the open zone will again be part of
the system.
QUICK REFERENCE GUIDE:
ARMING MODE HOW TO...
AWAY * OR A
HOME # OR H
NIGHT # OR H x 2
* Some interior zones can be programmed by the installer to be active in the NIGHT mode.
NOTE: Some model keypads may have a single "ARMED" LED.
EXIT DELAY ENTRY DELAY PERIMETER ARMED INTERIOR ARMED
YES YES
YES YES
NO NO
YES YES
YES NO
YES NO *
5