Changing The Clock Time; Backlight Intensity - Destiny apex 6100 Owner's Manual

F1 AND F2
These key functions are programmable and will be explained by your installer.
At default these keys will:
F1: Enter Remote Control Mode (Controls home automation features)
F2: Speaks Time and Date
Choose from the following list for the functions of your F1 and F2 keys:
Speak Time
Speak Long Term Memory
Light/Appliance Control
New Functions for Keys:
F1__________________
F2__________________
KEYPAD KEY-COMBINATION ALARM ACTIVATIONS
Simultaneously pressing certain key combinations on the keypad will result in the following events:
3 and STATUS- FIRE Alarm
1 and STATUS for 6160AP
6 and MONITOR – EMERGENCY (Medical) Alarm
4 and MONITOR for 6160AP
9 and F1 – PANIC Alarm
7 and F1 for 6160AP
The following 2-digit functions are only available from the system keypads and not from the phones:
(Both of the indicated keys must be pressed simultaneously).
•
2 & 8 changes time of day and date in the system clock
•
4 & 7 changes keypad backlighting intensity

CHANGING THE CLOCK TIME

To set or change the system time, press the 2 & 8 keys simultaneously from a hardwired keypad. The
system will respond by speaking "enter four-digit time." Simply enter the time in a 12-hour format. After
the time is entered, the system will say "enter 1 for AM, 2 for PM." After selecting AM or PM, the system
will confirm the entered time. If an invalid entry is made, the system will speak "error" and wait for a valid
entry. It will then prompt you to enter the day: 1 SUNDAY, 2 MONDAY... simply enter the appropriate
number for the corresponding day. It will then ask you to enter the two-digit month, followed by two-digit
date, and the two-digit year. After entering the values the system will speak the month day and year,
followed by "exit".

BACKLIGHT INTENSITY

You can control the brightness level of the key backlighting. The simultaneous depression of the 4 and 7
keys will step the backlighting through seven different levels of brightness. Press 4 and 7 simultaneously a
number of times until the backlighting is totally off. We define all backlighting off as level 1. Levels 2
through 6 will take the key backlighting through 5 progressively brighter levels. One step beyond the
brightest level will take the backlighting to half intensity.
Set Time
Enter Remote Control
Relay Output
Enter Bypass Mode
Silence Day Zone
3