Destiny apex 6100 Owner's Manual page 11

2 WAY AND LISTEN IN:
If your panel is equipped with microphones, any local or remote phone can be used for 2-way (talk/listen)
communication with anyone in your residence.
1. Access the system from a local or remote phone. (See Local Access or Remote Access)
Press 9,9,9,9 to enter "Listen" mode.
2.
3. Press "#" to talk; "*" to listen.
When done, press 0 to return to keypad mode and then hang up. Not pressing any buttons for 120
4.
seconds will cause the panel to automatically hang up (time is installer programmable).
NOTE: When in 2-way mode, the following key functions apply:
Digit: 1= turns on microphone # 1
2= turns on microphone # 2
3= turns on microphone # 3
4= turns off microphone # 1
5= turns off microphone # 2
6= turns off microphone # 3
7= changes to "high microphone sensitivity"
8= changes to "normal microphone sensitivity"
9= all microphones on
0= Exit to keypad mode/or will hang up
*= Listen
#= Talk
NOTE: Some Central stations may designate other key functions when in 2-way mode. If this is the case,
the homeowner "listen in" will follow the new key assignments.
NEW DIGIT: 1._____ 2._____ 3._____
4._____ 5._____ 6._____
7._____ 8._____ 9._____
*._____ 9._____ #._____
GLOSSARY
Below is a summary of terms and definitions used in this manual.
ALERT- The "alert" status indicates the system has been tripped, or activated. The system will remember
the "alert" status until cleared. To clear the "alert" status, simply re-arm the panel.
ANNUNCIATION- Beep or speech emitted over the phone or through system speakers to announce
activity or report system status.
11