Destiny apex 6100 Owner's Manual page 2

•
thermostat control by time of day, or system event trigger
SPECIALIZED "CONVENIENCE" FEATURES AND OPTIONS:
•
electric garage door operation from keypads, phones or keyfobs
•
front door visitor-to-homeowner communications without opening door
•
motion activated lighting
•
vehicle activated driveway annunciation
RK-36 LED / RKLCD / 6160AP– LED's
POWER
On when AC or back-up battery power is present. If AC power is lost, the STATUS LED will flash, the
system will speak "POWER OFF" one time, and the system will emit a trouble beep every few seconds
until the power is restored or the STATUS key is pressed to silence it.
STATUS
Yellow LED will be flashing when new information is available, solid after status has been asked for and
spoken, and off when no information is present. WHEN THE SYSTEM CONTINUOUSLY BEEPS
(indicating a system trouble), PRESS THE STATUS KEY TO SILENCE THE BEEPING AND
SPEAK A DESCRIPTION OF THE TROUBLE.
HOME
Red LED is on when armed to HOME. Press H to arm to HOME. Will also be on during NIGHT mode.
AWAY
Green LED is on when armed to AWAY. Press A to arm to AWAY. Will also be on during NIGHT mode.
NIGHT
While there is not a dedicated "NIGHT" LED, when the system is armed in the NIGHT mode, both the
HOME and AWAY LED's will be on simultaneously. Press H any time the system is already armed to
HOME to change to NIGHT. Pressing H when system is armed to NIGHT will change the arming back to
HOME. For example: You are at home and do not plan on leaving the house anytime soon so you arm the
system to the HOME mode. Several hours later you go to bed and simply press the H button again arming
your system to the NIGHT mode for greater protection while you are sleeping. When you wake up in the
morning simply press the H button again and you are able to walk around your house without fear of setting
the alarm off.
NOTE: Some model keypads may have a single "ARMED" LED, which is illuminated if the system is
armed in any mode (AWAY, HOME, or NIGHT).
RK-36 LED / RKLCD / 6160AP KEYPADS – SPECIAL KEYS
STATUS
Pressing this key will cause the system to immediately speak the system status. This will include the
arming status, any zones showing open, alert, or trouble, and any other available panel information.
MONITOR
Pressing this key toggles the system between three possible monitor conditions.
MONITOR ON – System will announce doors and windows when opened
MONITOR OFF – System will not announce doors and windows when opened
MONITOR TONE – System will beep instead of speak when doors and windows are opened. Commonly
called "chime".
2