Problem Solving Guide - Miele G 7881 Operating Instructions Manual

The following guide may help to find the reason for a fault and to correct it. You
should, however, note the following:
,
Repairs should only be carried out by a Miele authorised and trained ser-
vice technician in strict accordance with current local and national safety
regulations. Unauthorised or incorrect repairs could cause personal injury or
damage to the machine.
To avoid unnecessary service call-outs, check that the fault has not been caused
by incorrect operation.
To do this:
^ Turn the programme selector to f (the fault code goes out).
^ Switch the machine off with the I-0 switch.
^ Switch the machine on again and reselect the programme.
^ If the problem occurs again and cannot be remedied, please contact the Miele
Customer Contact Centre.
^ Quote the fault code "F...".
Fault
The machine does not
start.
The machine does not
work.
Possible cause
The door is not properly
closed.
The machine is not
plugged in.
The fuse is defective or
has tripped.
The machine is not
switched on.
Fault code: F 04 - F 17, F
20 - F - -
Fault code: F 31 - 33

Problem solving guide

Remedy
Close the door firmly.
Switch on at the mains.
Reset the fuse.
(Minimum fuse rating: see
data plate).
Press the I-0 switch and
select a programme.
Call the Miele Customer
Contact Centre.
There is a fault with the
controls for the dispensing
system.
Call the Miele Customer
Contact Centre.
49