HP Digital AlphaStation 255 Family User Information page 79

Figure 4–7: Removing the CD-ROM Drive Bracket
5. Lift the CD-ROM assembly up and out of the system unit as Figure 4–7 shows. The
CD-ROM drive is secured within the bracket by two screws. It is not necessary to
remove the cables from the CD-ROM. For convenience, you can rest the CD-ROM
assembly on the power supply.
6. Referring to Figure 4–8, remove the locking pin and push in the button latch
right side of the enclosure to release the drive tray.
7. Slide the drive tray back
R
and lift it up and out of the enclosure.
Installing System Options
1
2
MLO-013214
Q
on the
4–13