Advertisement
15
(Inform Tracker send TX000 to Server)
Request the tracker and the server to perform the two ways synchronize communications
(In order to let the tracker and the server to do the two way settings and information
exchanges, they must stay in connection status. But, under some circumstances, the tracker is
not connected to the server, such as under GPS off mode (sleeping mode) although the GSM is
active but the tracker do not stay connect with the server. With this command, the tracker will
immediately take the server command and react. If not, the tracker will also proactively
connect to the server within 3 minutes)
16
(Set GEO Fencing Activate)
Activate GeoFencing alarm send back，1
for one time and will set up once again when need it.
17
(Set GPS Fix Alarm Activate)
Activate GPS in 3D fixed message send back，1
available for one time and will set up once again when need it.
18
(Set Moving Alarm Activate)
Activate motion sensor alarm send back，1
for one time and will set up once again when need it.
19
(Set Over Speed Alarm Activate)
Activate over speed alarm send back，1
one time and will set up once again when need it.
The tracker will automatically send SMS message notice that the above settings and control
executed successfully.
enable , 0
disable The function only available
enable , 0
enable , 0
disable The function only available
enable , 0
disable The function only available for
disable The function only
Advertisement
