Download Print this page
Haicom HI-604X Manual

Haicom HI-604X Manual

Gps tracking device with 3-years standby battery/ip56 waterproof

Advertisement

Quick Links

HI-604X
Easy Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the HI-604X and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Haicom HI-604X

  • Page 1 HI-604X Easy Manual...
  • Page 2 User can check the real time location from the GPRS tracking web site or using the Haicom Tracking software installed on the PC and check the real time position on the map via the regular dial tone transmission.
  • Page 3 Features Haicom Asset Tracking Solution offers you a lot of advantages Quad band 850/900/1800/1900 MHz GSM system External SiRF Star III high performance GPS receiver Internal GSM active antennas Advanced communication via SMS/TCP/UDP/HTTP Program, control and update firmware the tracker from the OTA (Over the Air) web...
  • Page 4 • All-in-one design. • Provides you 24/7 access to the location of all your assets. • LIVE real-time tracking, configurable from every 20 second to 72hour GPRS updates! • Give complete supervision into your operations by seeing how long assets are sitting around in one place, when they start moving / stop moving etc. •...
  • Page 5 HI-604X Characteristics Items Items Specification Specifications s s s Items Items Specification Specification Power Supply DC 5V Backup Battery 5500mAh Normal power consumption Dimension 90.8mm x 52.3mm x 38.9mm Operating temperature -20℃ to 55℃ Humidity 5% to 95% Non-condensing Frequency...
  • Page 6: Getting Started

    SMS address hyperlink solutions. The HI-604X can also be programmed to automatically report its position at regular pre-set time intervals, which could be from every 30 seconds to every 72 hours. Also, set up to weak up and send location back during the long sleep mode.
  • Page 7 2. Place the SIM card on the SIM card tray and slid in the SIM card tray in. When the SIM card tray inserted in place, the HI-604X power will switch on. 3. To switch off HI-604 power, simply push in the yellow dot with any pen.
  • Page 8 Dimensions:...
  • Page 9: Led Indicator

    LED Indicator:...
  • Page 10: Standard Packing

    Standard Packing: 1. HI-604X main unit 2. SIM card tray 3. 18 pin to USB set up cable 4. AC power adaptor 5. DC cigarette lighter 6. mini CD with user manual...
  • Page 11 The in-build self contained battery: As mentioned, we can not tell you how long the HI-604 battery can last because it is really depend on how frequent the tracker used and the sleeping mode time. Anyway, here are the figures: POWER ON (GPS ON, GSM OFF) mA GSM connected (GPS on) 90 mA GPS OFF, GSM ON 25 mA...
  • Page 12 The car battery cable can be connected directly to the vehicle battery (12V or 24V) and transfer into 5V for the HI-604X. Very important: don’t connect HI-604 pintail cable directly to the vehicle battery because the pintail cable takes only 5V.
  • Page 13: Gprs Tracking

    GPRS Tracking: Set up the APN, IP and Port: 1. Connect HI-604X to computer USB port with the set up cable Setting up For the initial set up from the retail box, you will need to use the set up program from the inclusive small CD and perform the set up from your computer.
  • Page 14 3. Click the “ Get Parameter “ 4. Message will shown: “ GET FINISH “ and all the tracker current set up will appeared: Please double check with your local telecomm service provider to make sure the SIM card APN (Access Point Name) and fill in and program to the tracker.
  • Page 15 “ or any name. Also, please double check if the IP and port settings (the below red block) was correctly (for with Haicom GPRS tracking: http://www.tracking.haicom.com.tw:8090/Default.aspx The above settings are the must to make the tracker to start sending data back to our server and show on the platform.
  • Page 16 Terms Explanations System Config: 1. IMEI: Tracker ( International Mobile Equipment Identity number,IMEI# ) 2. Version: Tracker firmware version 3. SMS intervals[s]: Interval of tracker send real time position with Google map hyperlink via SMS 4. GPRS interval[s]: Interval of tracker send real time position to the server via GPRS 5.
  • Page 17: Phone Config

    Service provider), Example: internet SERVER CONFIG IP/DOMAIN NAME: Please fill in the server IP or Domain name. For example: IP: 60.250.68.23 or Domain name: http://www.tracking.haicom.com.tw:8090 TCP Port: Please fill in the TCP port UDP Port: Please fill in the UDP port CONFIG PORT: Please fill in the port for the tracker configuration software from the web tracking plate form to program from the air.
  • Page 18 SOS PHONE [ex.***** ;***** ;] Please fill in the telephone numbers for the tracker to call back when the SOS button is triggered. Please put a “ ; “ mark after each phone number. Maximum 10 phone numbers to be keyed in. SMS PHONE [ex.***** ;***** ;] Please fill in the telephone numbers for the tracker to call back when the request by the SMS command.
  • Page 21 SMS command SMS command Interpretation Interpretation SMS command SMS command Interpretation Interpretation #0000,100 Get All setting value back #0000,151,1000000000,2000000000,3000000000 Security Phone Set (10 Max.) #0000,152,1000000000,2000000000,3000000000 SOS Phone Set (10 Max.) #0000,153,1000000000,2000000000,3000000000 SMS Phone Set (10 Max.) #0000,154 Get Security Phone setting #0000,155 Get SOS Phone setting #0000,156...
  • Page 22 * Update new firmware 1. Decompress the files. 2. Run the TRACKER program 3. Plug the tracker to the computer USB port 4. Press the GET PARAMETER and see the current settings 5. Press the UPDATE 6. Open the firmware (2 files) 7.
  • Page 23 8. The firmware start loading 9. The below message shown and press OK...
  • Page 24 1. Initial registration from the GPRS web tracking platform: http://www.tracking.haicom.com.tw:8090/ New user; please register before login.
  • Page 25 3. The tracker idea # is shown on the bottom of the sticker: 4. After login, select the “ Manage “ for Add New Tracker...
  • Page 26 * Program tracker from Haicom GPRS web tracking web site 1. Make sure the tracker connected to the GSM network and start sending back the data 2. On the Manage/Device Settings section, select the tracker and press Load 3. Change the prefer settings...
  • Page 27 4. Press Setup and will show: Device information update successfully...
  • Page 28 How to generate the detail report print out with address 1. Select the preferred from and to date and click “Search “ 2. Click “Download “ and the csv file will be saved as Excel file 3. Click “Address Transfer.zip “ for the transfer program...
  • Page 29 1. Click “Address Transfer program icon to run the program “ 2. Select the csv Excel file 3. Click “Transfer Address (3) “ 4. After the translate program running, the “Translate successful ! “ message will appeared. In the mean time, there will extra Excel file with (Address) saved on your desktop.
  • Page 30 The example of the detail report printout:...
  • Page 31 How to calculate the historical total travel distance: 1. Click the preferred start point 2. Click the start point icon...
  • Page 32 3. Click the preferred end point 4. Click the end point icon 5. Click the Distance icon to get the total traveled distance...
  • Page 33 How to send command from the GPRS tracking platform: 1. Click Manage -> Command Send: 2. Click to send commands from the platform: Status Open (0) means the relay is stay connection. To cut the relay (cut off the ignition, oil pump, power, etc.), select Close (1)
  • Page 34 3. Click the Select to see the command sending status:...