Advertisement
EXAMPLE：#0000,210,60.250.68.23,9101,9120,1943,0
#
SMS initial code
0000
password (default is 0000)
210 Initial command code
60.250.68.23,9101,9120,1943,0
Fill in " * " between the comma when the above parameters unchanged.
Fill in nothing between the comma to empty the data (originally there are some parameters in
between, such as the APN, USER and the PASS)
Different parameters will divided by comma: " ， "
Explanations to the initial command code:
151
(Set Security Phone Number)
Fill in maximum 10 phone numbers
152
(Set SOS Phone Number)
Fill in maximum 10 phone numbers
153
(Set SMS Phone Number)
Fill in maximum 10 phone numbers
200
(Set APN)
APN：GPRS Access Point Name of the SIM card (check with your telecomm service provider
for the exact APN
USER：APN user name
PASS：APN password
210
(Set IP and Port)
IP：The server IP address which the tracker will send to (Domain name also OK)
TCP port：The destinate server TCP port
UDP port：The destinate server UDP port
Config port：Set up the two-way configuration port between the server and the tracker. User
can also set as " 0 " to disable the two way configuration function.
Protocol select：Select the communication protocol between the tracker and server
0
TCP、1 UDP
250
(Set Interval and Parameter)
SMS: The continue SMS sending time interval to certain preset phones. The setting is
recommended to set more than 10 (s), 10 seconds.
Varies parameters
Advertisement
