Advertisement
L: Set up the APN (Access Point Name) from the SIM card telecomm service provider
M: Set up the IP/Domain address of the tracking server for the GPRS data to send to
1. Can set up either the IP or the domain name
2. Set up the server receiving data protocol and port (Set TCP if the server protocol is TCP)
3. Set up the server receiving data protocol and port (Set UDP if the server protocol is UDP)
4. Set up the two-way configuration port between the server and the tracker. User can also set
as " 0 " to disable the GPRS function (under this mode, the SMS and the data logger functions
still keep on working) User can also set as " 1 " to switch off both the server alarm control
function and the two-way configuration function (under this mode, the GPRS coordinates
sending functions still keep on working)
N: Set up the telephone numbers which will receive SMS from all the alarm functions activated and
the tapping voice (except for the SOS)
O: Set up the telephone numbers which will receive SMS when the SOS alarm functions activated
and the tapping voice
P: Set up the telephone numbers which will receive SMS with the continue coordinates and the
tapping voice
Q: Set up the sleeping mode and the times:
1. Full power: Keep on sending coordinates none stop. Highest power consumption and no
need to set up the times.
2. GPS Off: The tracker GPS function will be switched off (based on the 'Time To Sleep'
colume time) after the tracker no moved. Under this mode, the tracker still stand by to take
the commands from the phone SMS or from the web tracking set up) As soon as the tracker
moved again, the GPS function will start to work again. Under this mode, the tracker
power consumption will be less.
3. All Off: The tracker all functions, GPS, GSM, etc. will be switched off (based on the 'Time
To Sleep' colume time) after the tracker no moved. Under this mode, the tracker will not be
able to take any commands from the phone SMS or from the web tracking set up) As soon
as the tracker moved again, all the functions will start to work again. Under this mode, the
tracker power consumption will be lowest.
4. Weak Up: The tracker all functions, GPS, GSM, etc. will be switched off (based on the
'Time To Sleep' colume time) regardless of the tracker motion sensor moved or not. Under
this mode, the tracker will not be able to take any commands from the phone SMS or from
the web tracking set up) After the finish the sleep time (based on the 'Time To Weak UP'
colume time) the tracker will switched on again to work normal. The automatic sleep and
weak up will be cycled continuesly base on the settings. The mode is suitable for the
Advertisement
