Front Heated Seats - Dodge RAM 1500 User Manual

Vehicle Equipped With Remote Start
On models that are equipped with remote start, this feature can be programmed to
come on during a remote start.
If your vehicle is equipped with a touchscreen, this feature can be programmed
through the Uconnect
Your Instrument Panel" in the Owner's Manual on the DVD.
If your vehicle is not equipped with a touchscreen, this feature can be programmed
through the Electronic Vehicle Information Center (EVIC). Refer to "Electronic
Vehicle Information Center (EVIC)" in "Understanding Your Instrument Panel" in the
Owner's Manual on the DVD.

Front Heated Seats

The front heated seats control buttons
panel below the climate controls.
If your vehicle is equipped with a touchscreen, the front heated seats control buttons
are located within the climate or controls screen of the touchscreen.
• Press the heated seat button
• Press the heated seat button
• Press the heated seat button
When the HI-level setting is selected, the heater will provide a boosted heat level
during the first four minutes of operation. Then, the heat output will drop to the
normal HI-level. If the HI-level setting is selected, the system will automatically
switch to LO-level after a maximum of 60 minutes of continuous operation. At that
time, the display will change from HI to LO, indicating the change. The LO-level
setting will turn OFF automatically after a maximum of 45 minutes.
Vehicle Equipped With Remote Start
On models that are equipped with remote start, this feature can be programmed to
come on during a remote start.
If your vehicle is equipped with a touchscreen, this feature can be programmed
through the Uconnect
Your Instrument Panel" in the Owner's Manual on the DVD.
If your vehicle is not equipped with a touchscreen, this feature can be programmed
through the Electronic Vehicle Information Center (EVIC). Refer to "Electronic
Vehicle Information Center (EVIC)" in "Understanding Your Instrument Panel" in the
Owner's Manual on the DVD.
system. Refer to "Uconnect
®
once to turn the High setting On.
a second time to turn the Low setting On.
a third time to turn the heating elements Off.
system. Refer to "Uconnect
®
G E T T I N G S T A R T E D
Settings" in "Understanding
®
are located on the center instrument
Settings" in "Understanding
®
33