Power Supply And Start - Electrolux FLE120 Service Manual

Service
2
17 9108
12
Manual
12. Function Sequences
Type Edition Page

Power supply and start

The door must be closed (closing switch S3 (6)) and locked (switch S4 (8))
before power is supplied to machine. Turning programmer knob from 0 to I
closes switch S30 (7). Point A is energised and the machine now starts if
a programmed card is inserted in the programmer.
The machine is normally switched ON and OFF using switch S1 (3) (12).
This means that relay K54 (11) is kept activated by (K54:10-6 (10) is
closed) even when the machine is off. When the emergency stop button
S2 (2) (13) is depressed, relay K54 is released. To restart the machine, you
must first reset the emergency stop button and then press S32 Restart (9).
This activates K54.