Climate Control System - Lancia Y Owner's Handbook Manual

2) Unscrew nut B and slide the com-
plete arm C from the rotating pin.
3) Fit a new arm and fasten the nut.
Close the cover.
IMPORTANT Before removing the
arm, mark the position of the wiper
(e.g. with felt-tip pen or adhesive
tape).
fig. 10
SPRAY NOZZLES
If there is no jet of liquid, first make
sure that there is liquid in the reser-
voir: see "Checking fluid levels" in
this section.
Then make sure that the holes in the
nozzles (figs. 10 and 11) are not
clogged up. Use a pin for this if nec-
essary.
The windscreen and rear window
washer jets can be adjusted.
The windscreen washer jet can be
adjusted by inserting a pin in the
aperture of each nozzle.
The rear window washer jet can be
adjusted by moving the nozzle-holder
with a screwdriver.
fig. 11
CLIMATE CONTROL
SYSTEM
During the winter, the climate con-
trol system must be turned on at least
once a month for about ten minutes.
Have the system checked at a LAN-
CIA Dealership before the summer.
The system uses R134a
refrigerating liquid. If it
accidentally leaks it will
not damage the environment.
Never use R12 fluid as it is incom-
patible with the system's compo-
nents and also contains CFC.
139