Lancia Y Owner's Handbook Manual page 106

FRONT DIRECTION
INDICATORS
To replace the 12V-21W bulb (type
PY21W):
1) Release spring clip A (fig. 13)
from support B by turning in the di-
rection of the arrow.
2) Pull out the lens unit from the
front.
3) The bulb holder C is connected to
the lens unit. To remove it, turn it
slightly.
fig. 13
4) Remove bulb E (fig. 14), by push-
ing it gently and turning it in an an-
ticlockwise direction.
5) Replace the bulb, then refit the
bulb holder to the lens unit.
6) Reposition the lens unit, by intro-
ducing the two tabs D into the guides
at the side of the headlamp.
7) Reattach spring clip A.
fig. 14
DIRECTION INDICATOR
REPEATERS
To replace the 12V-5W bulb (type
W5W):
1) Push the lens A (fig. 15) in the di-
rection of the arrow to release the fas-
tening tab. Be careful not to damage
the bodywork.
2) Take the unit out.
fig. 15
103