Lancia Y Owner's Handbook Manual page 103

7) Lower the car and re-
move the jack.
8) Tighten up the bolts com-
pletely in the order given previously in
(fig. 5).
9) Fit the wheel cover (LS version)
making sure that the inflation valve
seat is positioned correctly; press the
cover with the palm of your hands (do
not bang) against the rim shoulder
and ensure that all the retaining flaps
are inserted into the rim.
When you have finished:
– Put the space-saver spare
wheel into its special recess in
the boot.
– Refit the jack in its support mak-
ing A (fig. 7) coincide with the ring B
on the jack and positioning the base
of the jack to match C.
100
– Refit the tools you used on the sup-
port.
– Arrange the support and close the
fastener A (fig. 8).
IMPORTANT Check the inflation
pressure of the tyres and the spare
wheel regularly.
IMPORTANT If the type of wheel is
to be changed (alloy wheels in place
of steel wheels and vice-versa) all the
wheel bolts must be replaced with
others of a suitable length and a spe-
cific spare wheel employed with dif-
ferent construction characteristics.
The original wheel bolts though,
should be kept in case you wish to
change back to the original wheels at
a later date.
To unscrew/screw the inflation valve
cap, use extension F (fig. 2).
fig. 9