Electromagnetic Compatibility (Emc) - Leica Roteo 20HV User Manual

Labelling, Laser Class 3R (Roteo 35G)
D
EN
F
I
E
P
NL
DK
S
2
N
FIN
J
CN
ROK
1
PL
H
RUS
CZ
1) Laser beam
2) Plumb beam
Safety Directions
Laser Aperture
Laser Radiation
Avoid direct eye exposure
Class 3R Laser Product
according to
IEC 60825-1 (2007-03)
≤ 2.7 mW c.w.
P
0
λ = 529 - 535 nm

Electromagnetic Compatibility (EMC)

Description
The term Electromagnetic Compatability is taken to
mean the capability of theproduct to function smoothly in
an environment where electromagnetic radiation and
electrostatic discharges are present, and without
causing electromagnetic disturbances to other equip-
ment.
WARNING
Electromagnetic radiation can cause disturbances
in other equipment.
Although the product meets the strict regulations and
standards which are in force in this respect, Leica
Geosystems cannot completely exclude the possibility
that other equipment may be disturbed.
CAUTION
There is a risk that disturbances may be caused in
other equipment if the product is used in conjunction with
accessories from other manufacturers, for example field
computers, personal computers, two-way radios, non-
standard cables or external batteries.
Precautions:
Use only the equipment and accessories recommended
by Leica Geosystems. When combined with the product,
they meet the strict requirements stipulated by the guide-
lines and standards. When using computers and two-
way radios, pay attention to the information about elec-
tromagnetic compatibility provided by the manufacturer.
CAUTION
Disturbances caused by electromagnetic radia-
tion can result in erroneous measurements.
Roteo 20HV/25H/35/35G - 1.2.0en
23