Front Panel Assembly - JVC MX-G70 Service Manual

<Front panel assembly>
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly and the front panel assembly.
Removing the cassette
assembly (See Fig.24)
1. Disconnect the card wire from connector CN306 on
the head amplifier & mechanism control board.
2. Remove the four screws M and three screws M'
attaching the cassette mechanism assembly.
Removing the display system control
board (See Fig.25 to 27)
1. Remove the five screws N attaching the stay bracket.
2. Disconnect the card wires from connector CN316 and
CN880 on the display system control board.
3. Remove the seven screws O attaching the display
system control board.
4. If necessary, disconnect the wire from connector
CN911 on the front side of the display system control
board and unsolder FW915.
If necessary, remove the CD play board. (Fig. 28)
Removing the CD play board
1. Remove the three screws P attaching the CD eject
board.
2. If necessary, unsolder FW915 on the CD eject
board.
P
CD play board
FW915
(Soldering)
P
Fig.28
mechanism
(See Fig.27 and 28)
Display system control board
Head amplifier
& Mechanism control board
CN306
M
M'
Cassette mechanism
assembly
N
Display system control board
O
O
FW915
(Soldering)
O
CN880
CN911
M
M
M'
M'
Fig.24
N
Stay bracket
Fig.25
CN316
O
O
Display system control board
Fig.26
CD play board
FW915
FW915
Fig.27
MX-G70
1-13